Connection: Proprietary / LDAP SpliceCom Maximiser
Driver required: None
Firewall ports required: TCP: 389 (LDAP) TCP: 4000 plus various other site specific ports
Firmware version required:
(for new installations)
3.2 or later
Connection requirements:
Other notes:
Directory download: Extensions


The SpliceCom Maximiser connects onto the LAN via the RJ45 socket on the front of the PBX. The local IP address and other network settings are set through the HTML-based programming interface.

Go Connect Server Installation Notes

To perform an installation you will need the IP address of the PBX and the system username and password. You will also need to ensure that each extension’s “partner code” is set as the extension number.


The Maximiser supports an “off hook working” mode.
This mode should be used at the user’s discretion. Blind transfer, deflect and pickup are not supported.