Toshiba IP Edge

Connection:CSTA/SNMPToshiba IP Edge
Driver required:None
Firewall ports required:Site specific ports, normally TCP: 1101 to 1104
Firmware version required:
(for new installations)
Connection requirements:Spare CSTA license
Other notes:A dedicated CSTA license is required.
Directory download:Extensions

Architecture

The Toshiba IP Edge connects to the LAN via the RJ45 socket on the front. The local IP address and other network settings are set through the HTML-based management software.

Go Connect Server Installation Notes

To perform an installation you will need the IP address of the PBX and the SNMP community name. You will also require a CSTA license and an access port number to be programmed for Go Connect Server. This port number is also entered into Go Connect Server configuration.

Advisories

Certain “bridged” modes provide unusual operation. If possible avoid complex programming of the phone system. Do not use Line Keys, Pooled Line keys or GCO keys on any extensions on the system. Usage of these can lead to PBX overload and crashing.