Auerswald COMmander

Connection: HTTP / TAPI Auerswald COMmander
Driver required: Included
Firewall ports required: HTTP: 80
TCP: 7001
Firmware version required:
(for new installations)
COMmander 6000: V5.0A
COMmander Business: V4.0A
COMpact 50×0: V4.0A
Compact 3000: V4.0A
Connection requirements: A TAPI license is required to monitor more than four extensions (eight on COMmander 6000).
Other notes:
Directory download: Extensions

Architecture

The Auerswald COMmander connects to the LAN via the RJ45 socket on the PBX motherboard. The local IP address and other network settings are set through the management software.

Go Connect Server Installation Notes

To perform an installation you will need the IP address of the PBX.
You will also need the TAPI password.
Also lines need to be enabled in the management software to be monitored using TAPI.
The directory username and password is not mandatory. If used, it will allow Go Connect Server to download the names of the extensions.

Advisories

The main handsets supported are:
COMfortel 3500, 2500 (VOIP), 2500 (AB), 1500, 1100. Functionality is limited on other handsets, including ISDN and analog.